We believe that Coastworks is characterised by the following strengths:
All our workboats are certified by the MCA and operate under the workboat code.
15m x 6.6m x 1.7m draft
2 x 285HP Daewoo LO86TIH thru 3:1
5t bollard pull
HS Marine AK48 lifting 1.3t @ 15m
8t North Sea with 120m 28mm wire and 5t capstan
19m x 6m x 2.3m
2 x Caterpillar 3408, total 940hp
15t hydraulic towing winch & 5t hydraulic capstan
15.25m x 4.85m x 2.5m
415hp 12v71 GM engine thru 5:1 twin disk and kort steering nozzle
6.25t bollard pull
MCA Workboat Code Category 2 (60nm from a safe haven)
10.6m x 3.6m x 1.1m draft
160BHP Daewoo MD136 Engine thru 3:1 reduction gearbox
1.6t bollard pull
MCA Workboat Code of Practice RYA CAT 3
Length 15m, Breadth 9m; Moulded Depth 1.73m
MCA workboat cat 2, 60 miles from a safe haven
18m x 8.5m x 0.73m (all 16 sections)
Length: 34.3m; Breadth: 18.9m; Moulded Depth: 2.74m
Full UK loadline issued by MCA
943t @ 7tm2
30m x 11.2m x 2.5m
Max 80t crawler crane
400t @ 6tm2
Length: 6.1m; Breadth: 2.5m; Moulded Depth: 1.5m
Each unit can take up to 10t
50m x 18m x 3.5m
Length: 25m; Breadth: 12m; Moulded Depth 2.8m
MCA Workboat Code
70t crane or 80t excavator
Length: 44m; Breadth: 8m; Moulded Depth: 2.8m
Remote controlled hydraulic open/close system
335m3 or 637t capacity
4 available. 2 on the West Coast & 2 on the East Coast
49m x 9m x 3.4m
Remote controlled open/close system
450m3 or 970t capacity
As Clydeport licenced linesmen we are able to assist with the berthing of vessels & barges.
Length: 5.05m Breadth: 1.95m
Various petrol and electric outboards available
2.5m diameter x 6m long
Coastworker towing the CW-3 barge to McInroy's Point to start works on the new ferry linkspan
Installing the bubble curtain around the cooling water intakes to prevent jellyfish from entering
A couple of photos of our CW-5 modular pontoon barge working in Leeds. Thanks to WM Plant Hire for the photos, good to be working together again.
Coastworker demobilising the CW-4 barge after piling works in Faslane Naval Base.
Our multicat workboat Challenger working with the CW-3 & CW-4 barges at the new Brodick Ferry Terminal
Challenger & the CW-1 barge working at Greenock Ocean Terminal taking borehole samples
A nice photo of Challenger working with the CW-1 barge off Greenock Ocean Terminal.
We are always on the lookout for new additions to our fleet, either workboats, barges, winches
and cranes etc. If you have something that may be of interest to us, please drop us a email.
We occasionally sell some of our vessels and will be listing them here in this
section of our website. If any of these items are on interest, please click to make an enquiry.
Perhaps you have something for sale that you would like us to list on our website,
please click to send email to find out more.